Benefits and Installation of the Amazing Volvo HD Lights

Posted on November 13, 2011
Filed Under Uncategorized | Leave a Comment

Even though the Volvo is a remarkable vehicle that is loved by many, when it comes to driving at night there can be some improvements made as to how well you can see the world around you. One of the increasing trends has been utilizing the amazing Volvo HID lights. A HID, or high-intensity discharge, is a headlight technology that has been created to give the driver a bigger and more robust field of vision while driving at night. This will enable the headlight beam to have a wider and longer span due to the unique process of heating an inert gas called xenon.

Despite the fact that this technology was first introduced by BMW in 1991 with the 7 Series, vehicles of all makes and models have been utilizing the power of these bulbs to replace the traditional halogen. This is a remarkable benefit considering 90% of the information we use for determining how we drive comes from what we can see. If you are instead using standard bulbs you are considerably limiting what you are able to see at night. If you also take into account the fact that even though there are 60% less drivers on the road at night, 40% of those involved in accidents will die, than it seems foolish not to utilize these amazing Volvo HID lights.

In addition to the safety benefits, HID kits are also simple to install. To replace your standard headlights with HID lights you will only need to do the simple typical wiring, as well as mount a special ballast. This ballast is designed to increase the Volvo’s existing 12V DC to a higher rate more capable of heating the xenon gas required to make the exceptional bright lights.

Before beginning, first ensure that your vehicle is turned off, the battery has been disconnected, and the engine has completely cooled off so that you can avoid any potential injury.

Removing the halogen bulb

To start, first replace the halogen bulb with the new xenon HID. This can typically be found inside the low beam dust cover. The cover is located in the back of the headlight assembly and you can usually get inside by twisting it. When you can reach inside unplug the bulb by disconnecting the wiring.

Installing the new ballast

Next you will need to mount the special xenon ballast in a safe place that is out of the way. Keep in mind that your vehicle not originally designed for the amazing Volvo HID lights, so you will need to keep the ballast in close proximity to both the new bulb and the original hook up wiring.
When you have securely mounted the ballast, connect the xenon bulb, but be cautious not to touch the glass. Once this is complete you can go back and make sure all connections are tight before finally testing your new HID lights.